Conspiracy Cafe

Conspiracy, alternative news, history, intelligence agencies

U.S. Survival Rifle 22LR Semi-Auto AR-7 Henry Repeating Arms

Fun Gun Reviews Presents : The U.S. Survival Rifle. This super lightweight 22LR semi-automatic rifle breaks down into four pieces that can be store away into the waterproof stock. Made by Henry Repeating Arms, this handy little rifle is perfect for hikers, campers, fisherman, bush pilots, or anyone who spents time in the great outdoors!

The ArmaLite AR-7 Explorer, designed by M-16 inventor Eugene Stoner, is a semi-automatic .22 Long Rifle rifle developed from the AR-5 adopted by the U.S. Air Force as a pilot and aircrew survival weapon. Its intended markets today are backpackers and other recreational users as a take-down utility rifle. The AR-7 is often recommended by outdoor users of recreational vehicles (automobile, airplane or boat) who might have need for a weapon for foraging or defense in a wilderness emergency.

History & design

The prototype of what would become the AR-7 was designed by Eugene Stoner at ArmaLite Inc., a division of Fairchild Aircraft. The rifle shares some of the features of the bolt-action AR-5, another rifle designed by Stoner for ArmaLite and adopted by the United States Air Force in 1956 as the MA-1.[1] The MA-1 was intended to replace the M4 Survival Rifle and the M6 Aircrew Survival Weapon which was a superimposed ("over-under") twin-barrel rifle/shotgun chambered in .22 Hornet and .410 bore, using a break-open action. The AR-5 had the advantage of repeat fire over the then-standard M6, using the same .22 Hornet cartridge. When the AR-5 was adopted as the MA-1 but was not placed in issue due to the numbers of M4 and M6 survival weapons in USAF inventory, ArmaLite used the research and tooling for the AR-5 in developing the AR-7 for the civilian market.

Armalite AR-7 Explorer internal parts assembled (left sideplate removed)

The AR-7 uses a blowback semi-automatic action in .22 Long Rifle but retains the AR-5/MA-1 feature of storing the disassembled parts within the hollow stock, which is filled with plastic foam and capable of floating.[3][4] Like the bolt-action AR-5, the AR-7 was designed as a survival rifle for foraging small game for food. The AR-7 is constructed primarily of aluminum, with plastic for the stock and buttcap. Even the barrel is aluminum (in later production composite material), using a rifled steel barrel liner.[5] The AR-7 measures 35 inches overall when assembled. It disassembles to four sections (barrel, action, stock, and magazine), with three parts storing inside the plastic stock measuring 16 inches long. The rifle weighs 2.5 pounds light enough for convenient backpacking. The rear sight is a peep sight, which comes on a flat metal blade with an aperture (in later production two different size apertures), and is adjustable for elevation (up-down). The front sight is adjustable for windage (side-side). Accuracy is sufficient for hunting small game at ranges to 50 yards.

Criticism

Reliability of the AR-7 is highly dependent on the condition of the magazine and on the ammunition used, perhaps more so than with other models of semi-automatic .22 caliber rifles. The feed ramp is part of the magazine and subject to damage from mishandling. Flat-nosed bullets tend to jam on the edge of the chamber of the barrel. The transition of cartridge from magazine to barrel can be smoothed by minor beveling of the chamber of the barrel, by using round-nosed as opposed to flat-nosed bullets and by paying attention to condition of the feed lips and feed ramp of the magazine. Later production magazines include an external wire spring to align the cartridge; earlier magazines used two pinch marks at the top of the magazine body, which could become worn over time.

All iterations of the AR-7 from the Armalite to the Henry use bolt and dual recoil springs that are heavy compared to most other .22 semiautomatics. The AR-7 requires high velocity ammunition for reliable functioning. The manufacturer recommends use of 40 grain round nose bullets in high velocity loadings. It is still possible to manually load a single round into the firing chamber, allowing use of flat nosed bullets or low velocity or subsonic ammunition.

The barrel takedown nut tends to loosen after firing and may need hand tightening to maintain both accuracy and reliability.

Armalite sold the design to Charter Arms in 1973. According to some accounts posted by enthusiasts, this is where quality began to deteriorate.[6] Barrels were said to have a tendency to warp. Other sources state that the first production at Charter had problems which were corrected in later production runs.[2] Since Charter Arms sold the design and rights to Henry Repeating Arms in 1980, the Henry AR-7 has regained a reputation for reliability.

Production history

(Summary of information available in The Blue Book of Gun Values)

1959-1973: ArmaLite

1973-1990: Charter Arms

1990-1997: Survival Arms, Cocoa, Florida

1997–Present: Henry Repeating Arms Co., Brooklyn, New York

1998-2004: AR-7 Industries, LLC, Meriden, Connecticut (bought by ArmaLite in 2004)

 

Posted by George Freund on September 10, 2013 at 10:33 PM 5685 Views